AKE Sales Tech Blog

  1. Get a clean cut even on the most brittle materials

    Get a clean cut even on the most brittle materials
    When looking for saw blades, there are two important factors to consider: consistent cut quality and price. The industry is constantly looking for clean cuts to help them produce better finish quality and consistency, as well as reduce waste. The blade quality is especially important if you are cutting expensive or brittle mouldings and need the very best finish. Most...
    Read more »
  2. Feedplate Maintenance

    Feedplate Maintenance
    Tools and parts should regularly go through check and maintenance to ensure that they continue to perform well, and this includes feedplates. Before you begin your feedplate maintenance routine, please remember to follow every possible safety precaution when inspecting inside the infeed spout. It is important to ensure the disc has come to a complete stop before attempting any maintenance...
    Read more »
  3. Improving wood chip quality

    Improving wood chip quality
    One of the most important qualities of good wood chips is consistent thickness. For example, using consistently sized wood chips can reduce mechanical jams of the fuel feeding equipment. On the other hand, the pulp and paper industries prefer as much uniformity in chip sizes as possible, because it affects the packing for transportation. As such, more than just ensuring...
    Read more »
  4. CNC Router Tooling Installation and Care

    CNC Router Tooling Installation and Care
    CNC Router Tooling Installation and Care All tools are subject to wear and tear, but the longevity of your tools also depends on usage and care. Firstly, you have to get the foundation right – the correct torque is essential. Torque is defined as the measure of a force’s tendency to produce torsion or rotation about an axis. When setting...
    Read more »
  5. How to get the best from your collet

    A Collet is a subtype of chuck that forms a collar around an object to be held and exerts a strong clamping force on the object when it is tightened, usually by means of a tapered outer collar. It may be used to hold a workpiece or a tool. There are two things you want to avoid when installing a...
    Read more »
  6. Cutting 2.0 AKE edge bander pre-milling tools – For better cut quality and longevity

    The challenge for industrial customers is ensuring the very best consistent edge quality in a variety of materials, colours and finishes. Changing tools is expensive, time consuming and can result in machine recalibration – often done by outside contractors. The patented Cutting 2.0 AKE edge bander pre milling tools will enable better cut quality, longer life, especially on difficult to...
    Read more »
  7. AKE Sales Tech to participate in AWISA 2018 exhibition this July

    AKE Sales Tech is pleased to announce their participation in the AWISA exhibition held at the new Darling Harbour exhibition centre in Sydney from July 4-7th.
    Read more »
  8. Super specials at AKE Sales Tech

    DP shank cutter Z2 – Cutting 2.0 Application: For sizing, grooving, jointing, rebating. Very precise shank tolerances, therefore suitable for shrink clamping (recommended). Material: Panel material with and without coating. Machine: Stationary machines with and without tool charger. Design: DP knives with axial angle and divided cut; shank 20 and 25 with internal thread. Tooth: DP, Ø 20 with tip...
    Read more »
  9. How to maximise the output from CNC compression router bits

    In the modern nesting application where results are measured by speed of processing, quality of cut and minimising down time it is essential that tooling is correctly selected and applied.  So often the tool is the poor cousin and when this happens efficiency is compromised.In the modern nesting application where results are measured by speed of processing, quality of cut...
    Read more »
  10. Beam Saw Blades – Cutting 2.0

    Beam Saw Blades – Cutting 2.0
    Cutting 2.0 technology has proven to be extremely successful since being introduced to the market in 2013. From its origins at AKE in the SuperSilent sliding table saw with manual feed, it has been consistently developed and expanded, starting with the milling cutter range and now moving on to panel saws with mechanical feed. In the meantime, significant practical experience...
    Read more »

Items 1 to 10 of 15 total

Close X