Sawmilling Competence by AKE Salestech

Trust a competent partner for the sawmilling industry. At AKE Salestech, we offer complete solutions for all segments of the sawmilling industry, from the green mill to the dry mill using innovative technology.

Our application technicians support customers/partners on-site with their know-how and competence. Unique value chain due to tremendous experience made over many decades. High-quality tooling “Made in Germany”, which ensures high efficiency. Tooling is produced according to the recommendations of the machine manufacturers, but also according to customer demand (custom made).

Saw blade design, including special treatment during production. AKE can influence the following parameters:  

  • diameter
  • number of teeth
  • gullet design
  • hardness
  • stiffness
  • coating

Advantages of coatings:

  • reduced resin build-up
  • significantly reduced friction on the saw blade body
  • significantly increased lifetime/working time
  • significantly improved cleaning process

(Type 0003/8003) Profiling segments for the length cut in profiling units

Tooling is produced according to the recommendations of the machine manufacturers, but also according to customer demand (custom made).

Profiling segments for the length cut in profiling units

(Type 8002) Hogger rings/reducer segments for the length cut in reducer units

Tooling is produced according to the recommendations of the machine manufacturers, but also according to customer demand (custom made).

Hogger rings/reducer segments for the length cut in reducer units

Chipper canter knives

To produce wood chips.

Tooling is produced according to the recommendations of the machine manufacturers, but also according to customer demand (custom made).

Knife performance can be positively influenced by:

  • Steel grade selection
  • Coatings
  • Cutting angles
  • Hardness
  • Grind quality

(Type 0004) Mustang-circular sawblades for pre- and finishing

  • optimized sawblade design
  • reduced resin build-up
  • better cutting performance
  • increased lifetime (linear meters
  • improved chip transport
  • higher feed speeds
  • sawblade kerf adapted to cutting height
  • superb cutting quality
  • if required, also stepped body designs are available

Mustang-circular Sawblades for pre- and finishing

(Type 0005) Solid wood circular sawblades for the further processing of dried timber

Used on splitting machines – embedded teeth for “glue cut” – this tooth style prevents gullet wash out and ensures stronger brazing for the most rigorous applications.

Solid Wood Circular Sawblades Australia

For horizontal and vertical cuts.

Available in different designs.

Custom made designs are also possible.

Also available in the thin kerf.

Advantages of the thin kerf design:

  • minimized kerf for maximized material savings
  • more economical due to reduced power consumption

(Type 0015) Solid wood circular sawblades for the finest quality crosscut docking applications

Used on standard and high-speed docking and scanning lines. Select from the standard range or custom made for your application.

Solid Wood Circular Sawblades Australia

Dry Mill Profile Tooling

Application-based solutions for profiling and jointing in HSS, HW or PCD. Finger jointing, profiling, T&G flooring. Whatever the application is AKE, Salestech has a solution for it.

Dry Mill Profile Tooling in Australia

Accessories

The extensive accessory range for service departments.

  • dial gauges
  • concentricity and run-out test devices
  • grinding wheelsman
  • gnet foil
  • hammer
  • anvils
  • ruler
  • AKE multi cleaner
  • spacer rings (steel or alloy)
  • flanges
  • or complete straightening workplaces