DP shank cutter Z2 – Cutting 2.0

  • Application: For sizing, grooving, jointing, rebating. Very precise shank tolerances, therefore suitable for shrink clamping (recommended).
  • Material: Panel material with and without coating.
  • Machine: Stationary machines with and without tool charger.
  • Design: DP knives with axial angle and divided cut; shank 20 and 25 with internal thread.
  • Tooth: DP, Ø 20 with tip height 4mm, re-grindable up to 10 times Ø 25 with tip height 5mm, re-grindable up to 14 times. L3* = UP-CUT


DP spiral shank cutter Z3 – Cutting 2.0

  • Application: For sizing, grooving, jointing, rebating. Very precise shank tolerances; for free plunging and circular drilling (helix); also suitable for shrink clamping.
  • Material: Panel material with and without coating.
  • Machine: Stationary machines with and without tool changer.
  • Design: DP knives with axial angle and divided cut; shank 20 and 25 with internal thread.
  • Tooth: DP, Ø 20 with tip height 4mm, re-grindable up to 10 times Ø 25 with tip height 5mm, re-grindable up to 14 times. L3* = UP-CUT


DP shank cutter Z1/Z2/Z3 Harmony – Cutting 2.0

  • Application: For sizing, grooving and jointing of wood-based panel material, both with and without coating. Especially suitable for chip board with low density and front-end processing of solid wood. Very precise shank tolerances; thus suitable for shrink clamping (recommended) suitable for plunge cutting and circular (helix) drilling.
  • Material: Panel material with and without coating.
  • Machine: Stationary machines with and without tool changer.
  • Design: Ø6 – 12,7mm tool body of solid carbide, Ø 16 – 25mm tool body of steel
  • Tooth: DP knives with extremely large axial angle with Up-cut and Down-Cut design; for the production of tear-free jointing edges. Asymmetrically positioned knives suitable for rabates of up to 5mm height. DP; L3* = Up-Cut


HP clamping system

HP collect chuck



Standard hook wrench


Torque spanner



Promotion valid while stocks last!