Saw Milling

Focussed knowledge – for the best possible results – and maximum cost-effectiveness.

As a tool specialist, we provide complete system solutions for sawmills and planing mills. An unparalleled ratio of in-house production and decades of experience form the foundation of AKE saw blades. The most productive sawmills in the world trust in the high quality and cutting-edge technological standards of tools made by AKE.

Enquire Now
Enter details about your machinery or industry and what you require.
Cancel

Circular saw blades for pre-cutting

Circular saw blades with rakes and recessed basic bodies. Custom-built in the AKE Multistep design for extreme cutting conditions. Customer-optimised design for maximum feed and tool life.

Circular saw blades for re-cutting

Smooth or recessed circular saw blades with reinforced basic body and rakes for high feed rate and tool life. The cutting widths and tooth shapes are optimised for the required cutting heights.

Mustang Standard

Circular saw blade with two or three external carbide-tipped rakers, for longitudinal cuts at cutting heights of up to 70 mm

Mustang Optimal

Circular saw blade with external and internal carbide-tipped rakers, for longitudinal cuts at cutting heights of up to 150 mm

Mustang Perfect

Circular saw blade with internal carbide-tipped rakers featuring limited chip thickness, for longitudinal and transverse cuts

Mustang Extra

Circular saw blade with internal carbide-tipped rakers and a thin cutting width

Clamping bushings, template rings and splitting wedges

Clamping bushings and splitting wedges are produced in accordance with the specifications of the machine manufacturer. Surface ground template rings made of steel or light metal with high axial runout accuracy.

In addition body and tooth coating can be offered to further optimise the sawing solution:

Body Coating:

  • Oxide coating
    • Reduced build-up of resin
    • Reduced friction against the basic body
    • Longer tool life
    • Easy to clean
  • Chrome coating in various layer thicknesses
    • Reduced build-up of resin
    • Reduced friction against the basic body
    • Very little tension lost if the wood remains in the sawing machine
    • Longer tool life
    • Thinner kerfs possible
    • Significantly easier to clean

Tooth coating for Type 8620

Multi-layer coating

  • Reduced build-up of resin
  • Significantly increased tool life and feed rates with dry wood
Close X